How to install a shade sheet

How to install a shade sail

Before y'all embark installation it is very of import that you lot consider the near suitable location for your shade canvas(s) taking into account the factors below. We've as well prepared a 10min video that takes you through how to install your shade sheet.

Before you commence installation it is very important that you consider the well-nigh suitable location for your shade sheet(s) taking into business relationship the post-obit:

  1. Size of the shade sail(s)&
  2. Force of existing structures intended to be anchor points
  3. Power to insert fixing posts
  4. Location of barbecues
  5. Sun direction etc

Picket the video

This curt video provides a simple overview to installing a triangle and foursquare Coolaroo Shade Sail.

There could also be other factors, specific to your state of affairs, which require consideration.

Installation Tips

Earlier you get-go

At that place are some important factors you need to consider earlier you go started. Let's take a look!

  • Determining The Correct Fixing Points

    Once you accept identified the location for your shade sail(s) it is important to determine the almost suitable fixing points for the corners. Some of these fixing points could already be e.yard. pergola/sundeck, large tree, contend post or fascia.

    This stage of the installation is critical. Yous should ensure all fixing points are structurally sound and if unsure, obtain independent advice from a builder or engineer.

  • Edifice Approvals

    Prior to installation, check with local authorities for any relevant building regulations which may exist.

  • Selecting Fixing Accessories

    In that location is an all-encompassing range of fixing accessories available to help you secure your shade sail(s). These accessories are readily available from your normal hardware supplier.

    Rope/chain - to extend your shade canvas to a fixing point if required.

    Select the fixing accessories which best suit your ain installation.

Attaching to Existing Supports

  • Attaching To Fascia

    If you intend to ready your shade canvas to a fascia the use of a Fascia Support is strongly recommended. The Fascia support is used to connect the overhangs of rafters or trusses to fascias ledgers giving a potent connection between the 2 and improved force.

  • Attaching to copse

    We recommend that the fixing of shade sails to copse be for TEMPORARY Employ ONLY. The diameter of the tree where the sail will exist fixed must be at least 250mm(9.75").

Attaching to additional supports

  • Post Supports

    If additional posts are required, the employ of treated softwood (H5 level treatment) is recommended. Hardwood of durability Class i can besides be used. Your local timber supplier can assist yous in selection. Mail service lengths should be calculated taking into account the proposed peak of your sail plus the depth of your footings.

    Steel posts are likewise suitable and are available from either your normal hardware outlet/home centre or your local steel supplier. Steel posts can be cutting to predetermined lengths and painted to a colour matching your shade sail and the environment.

Footings

Mensurate out centres of basis positions and mark equally illustrated. Dig holes 400 mm (16") sq. & 800mm (32") deep.)

  • Business firm Ground

    Lay a 100mm (4") depth of 20mm (3/4") dia gravel at the base of operations of the mail service.

  • Soft Ground

    Pour a 100mm (4") depth of concrete at the bottom of the hole to provide a solid pad. Insert the posts and, with cord lines, ensure they are in plumb alignment. Temporarily brace the posts.

  • Concreting

    Mix physical in line with manufacturer'south instructions. These will be labelled clearly on the package. Your supplier will be able to give yous any special advice you may crave for your own atmospheric condition. Pour concrete to the top of the holes ensuring it is packed well. Ensure the physical surface is sloping away from the posts to aid water drainage. Allow poles to set in physical for a minimum of 48 hours. Brace if required.

Installation

Connect fixing accessories to mounting points as required. Ensure all connections face up towards the middle of the sail and are tightly secured. Check again to ensure all mounting points are solid. Lay your shade sail out and commence the installation.

Tensioning

Using the selected fixing accessories, commence connecting the corners of the shade sail to the fixing points.

Connect all points, using a ratchet tensioning tool if necessary to gain increased leverage. Stop tensioning when the shade sail is rigid with fiddling or no creases. CAUTION: Practise not over tension. Re-tension periodically if required.

Warning

Your Coolaroo shade sail is designed to provide UV protection and comfort in domestic areas. When selecting the position for your shade sail, ensure all fixing points are structurally sound and fixings are tightly secured. Inspect regularly. Prior to installing, consult your local council regarding building regulations which may apply in your area. Exposure to sure chemicals e.g, Chlorine can lead to the premature breakdown of the fabric. Chemicals to be used on or around the fabric should be referred to Coolaroo prior to their use.

Practice not have fire or an open up flame shut to the fabric. Do non apply your barbecue under the shade structure.

Care Instructions

Your shade sail(s) may be cleaned at any time using a solution of balmy detergent and water. Apply the solution with a sponge or a very soft brush. Let the solution stand up on the fabric for 10 minutes and rinse thoroughly with water from your garden hose.

DO Not put the material in your washing machine, clothes drier, or scrub it with a stiff brush, scouring pad, or an abrasive cleaner.

For more information about shade sails cheque out our articles on choosing the correct shade sail and DIY shade textile installation.

Find specific instructions on how to install the Coolaroo three.six x 3.half dozen Triangle Sail Shade here.

Related Articles